Swing Check Valve H44T

Features

1) The swing check valve has reasonable structure, reliable sealing, small flow resistance and excellent performance. 2) Good scratch resistance and long service life. 3) Various piping flange standards and sealing surface types can be used to meet the needs of various working conditions. 4) The valve disc rotates around the pin outside the valve seat to reduce the violent impact when closing. 5) The connection between the pin shaft and the valve disc adopts a built-in structure, which is more reliable in use.


  • Parameters and introduction
  • Overview

    The swing check valve is a kind of check valve that the valve flap opens and closes with the upward rotation of the rocker arm, which can automatically prevent the backflow of the fluid. The disc of the check valve swings upward under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve disc will automatically close under the action of fluid pressure difference, gravity and other factors to prevent the fluid from flowing back.


    Implement the standard

    1) Design and manufacture standard: GB/T12236-2007

    2) Connection flange standard: GB/T9113-2010, GB/T17241.6-2010 (iron)

    3) Structure length standard: GB/T12221-2005

    4) Pressure test standard: GB/T13927-2008


    Main technical parameters

    Nominal pressure (Mpa)

    Strength test MPa

    Seal test MPa

    Applicable temperature (℃)

    Applicable medium

    1.0

    1.5

    1.1

    ≤350℃

    water, air, oil

    1.6

    2.4

    1.76


    Material of main parts

    Part Name

    Material

    Body

    QT450-10、HT200

    Bonnet

    QT450-10、HT200

    Seal ring

    Asbestos Rubber Sheet

    Disc

    QT450-10+Copper alloy

    Rocker arm

    QT450-10


    Structure diagram

    图片1.jpg